any rev made to this print must have an updated mkt print do not scale from this print .155 3.94 ref .073 1.85 ref .363 9.22 "a" "a" 1 2 5 .0060[0.152] item no. part number qty material 1 asp-103598-01-b 1.0000 ul 94 v0, color: black 2 asp-103599-01-b 1.0000 ul 94 v0, color: black 3 asp-104554-02-p-h 114.00 brass alloy 260, 3/4 hard 4 sbd-030-6337 114.00 63% tin /37% lead 5 k-850-650 1.0000 polyimide film 6 ct-asp1134ms .0057 conductive polymer .105 2.67 ref .420 10.67 ref 1.050 ref 26.67 .155 3.94 ref .460 ref 11.68 .295.020 7.490.51 .990 ref 25.15 .350 8.89 ref .250 6.35 ref .900 ref 22.86 (19 pos - 1) x .0500[1.270] .020.010 0.510.25 01 19 a b c d e f .278 7.05 .016 ref (typ) 0.41 .083 2.11 2 max sway (typ) section "a"-"a" 3 4 .255 6.48 .339 ref 8.61 'a' in-process .008.002 0.200.05 detail 'a' scale 6 : 1 c1 c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 2 .xxx: .005 .xxxx: .0020 by: ASP-103614-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 10/18/2002 2 1 sheet scale: 3:1 c:\enterprisevault\dwg\misc\mktg\ASP-103614-01-mkt.slddrw plating on entire terminal: .000030 gold over .000050 nickel notes: 1. custom for variation of vita 42 xmc standard & items -1, -2, & -3 not available as standard. 2. represents a critical dimension. 3. burr allowance: .0015[0.038] max. 4. maximum cut flash: .010[0.25]. 5. minimum pushout force: .5 lb. 6. maximum allowable bow; top/bottom: .004[0.10], side/side: .003[0.08]. 7. parts to be packaged in tape & reel. for qty`s less than 125 pcs, no trailer or leader will be supplied. vita 42 (leaded) 10mm mated socket assembly 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision n
1.732 ref 44.00 .945 ref 24.00 user direction of un-reeling pocket not detailed 6 packaging view .900 22.86 .250 6.35 trace .0100 [0.254] free of solder mask .0310 [0.787] pad .0200 [0.508] via (plated) .0100 [0.254] 45 .0250 [0.640] see detail 'b' 01 19 recommended board layout detail 'b' f e d c b a .250 6.35 .900 22.86 .0250 0.635 (typ) .050 (typ) 1.27 .050 1.27 (typ) 01 19 recommended stencil layout stencil to be .0060[0.152] thick a b c d e f sheet of vita 42 (leaded) 10mm mated socket assembly by: ASP-103614-01 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. clay w 10/18/2002 2 2 sheet scale: 4:1 ASP-103614-01 c:\enterprisevault\dwg\misc\mktg\ASP-103614-01-mkt.slddrw revision n 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
